屋外ライト apleton GEA 65-203601のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。apleton GEA 65-203601 2 ページ。 Exterior & garden lighting

Please read this manual carefully before installation. Installation, mounting or works on the electrical

connection may only carried out by an approved electrician.

Technical data:

Rated voltage: 220V~240V, 50Hz

Lamp: 220V~240V, GU10, 35W max

Installation instruction:

First check if the luminaire was damaged during the transportation. Ensure that the supply is switched off

before installation.

These unit are suitable for connection to a 220V~240V POWER supply.

•

Allow a minimum of 30cm gravel drainage under the body of the lamp. Test the drainage by

•

filling the tube with water.

The top of the mains sleeve should be mounted flush to the surface (pic.2) and then concreted.

•

Do not attempt to install during inclement weather conditions.

Insert the mains ( use only silicone cable, type H05SS-F, temperature resistant 180°C) into the

•

cable gland.

Connect the cable to the terminal block on the unit as following:

•

NEUTRAL

EARTH

LIVE

and fit the lamp into the housing. Secure tightly the cable gland nut (max 4Nm). Never cover the

visible part of the fitting with soil.

For the installation of 2-3 fittings it is possible to connect them like picture 4.

•

For installation of 4 fittings or more connect them like picture 5.

•

Screw the housing to the sleeve. Lay the diffuser. Overlap the stainless steel ring and screw

•

tightly.

Exterior & Garden Lighting

gea 65-203601