- ページ 2
送信機 Aplisens APM-2のPDF 機器マニュアルをオンラインで閲覧またはダウンロードできます。Aplisens APM-2 17 ページ。 Smart electronic differential pressure transmitters
ページを印刷する
Symbols used
Symbol
Warning to proceed strictly in accordance with the information contained in the
documentation in order to ensure the safety and full functionality of the device.
Information particularly useful during installation and operation of the device.
Information particularly useful during installation and operation of an Ex type
device.
Information on disposal of used equipment.
The manufacturer will not be liable for damage resulting from incorrect installation,
failure to maintain suitable technical condition of the device or use of the device
other than for its intended purpose.
Installation should be carried out by qualified staff having the required
authorizations to install electrical and I&C equipment. The installer is responsible for
performing the installation in accordance with manual as well as with the
electromagnetic compatibility and safety regulations and standards applicable to the
type of installation.
All safety and protection requirements must be observed during installation,
operation and inspections.
If a malfunction occurs, the device should be disconnected and handed over to the
manufacturer for repair.
In order to minimize the risk of malfunction and associated risks to staff, the device
is not to be installed or used in particularly unfavourable conditions, where the
following hazards occur:
Installation of the transmitter in explosion-risk atmospheres must comply with the
requirements of relevant instructions and national standards and regulations.
Changes made to the manufacturing of products may be introduced before the paper version of the
manual is updated. The up-to-date manuals are available on the manufacturer's website:
www.aplisens.com.
BASIC REQUIREMENTS AND SAFE USE
−
possible mechanical impacts, excessive shocks and vibration;
−
excessive temperature fluctuation;
−
water vapour condensation, dusting, icing.
Description