Aplisens APM-2 장치 설명서 - 페이지 2

{카테고리_이름} Aplisens APM-2에 대한 장치 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aplisens APM-2 17 페이지. Smart electronic differential pressure transmitters

Symbols used

Symbol

Warning to proceed strictly in accordance with the information contained in the

documentation in order to ensure the safety and full functionality of the device.

Information particularly useful during installation and operation of the device.

Information particularly useful during installation and operation of an Ex type

device.

Information on disposal of used equipment.

The manufacturer will not be liable for damage resulting from incorrect installation,

failure to maintain suitable technical condition of the device or use of the device

other than for its intended purpose.

Installation should be carried out by qualified staff having the required

authorizations to install electrical and I&C equipment. The installer is responsible for

performing the installation in accordance with manual as well as with the

electromagnetic compatibility and safety regulations and standards applicable to the

type of installation.

All safety and protection requirements must be observed during installation,

operation and inspections.

If a malfunction occurs, the device should be disconnected and handed over to the

manufacturer for repair.

In order to minimize the risk of malfunction and associated risks to staff, the device

is not to be installed or used in particularly unfavourable conditions, where the

following hazards occur:

Installation of the transmitter in explosion-risk atmospheres must comply with the

requirements of relevant instructions and national standards and regulations.

Changes made to the manufacturing of products may be introduced before the paper version of the

manual is updated. The up-to-date manuals are available on the manufacturer's website:

www.aplisens.com.

BASIC REQUIREMENTS AND SAFE USE

−

possible mechanical impacts, excessive shocks and vibration;

−

excessive temperature fluctuation;

−

water vapour condensation, dusting, icing.

Description