メディア・コンバーター Addonics Technologies ADSSSAI44のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Addonics Technologies ADSSSAI44 1 ページ。
Installation Guide
Front View
Screw hole
Slim ATAPI SATA
Power and
Data Connector
Pin 1 Marker
Master, Slave &
Cable Select
Jumpers
Jumper Settings
Master
Slave
Note:
To set the slim ATAPI SATA drive as a Master
Device when connected to an IDE channel, you
need to short the top pins located on the converter
by placing a jumper. As a Slave Device short the
middle pins.
ADDONICS TECHNOLOGIES
Model: ADSSSAI44
44-pin IDE Connector
Screw hole
Cable Select
1.
Locate the slim SATA ATAPI connector of your optical
drive.
2.
Connect the converter board to the Slim SATA ATAPI
connector of the optical drive. Secure the adapter using
screws.
3.
(Optional) Connect the IDE ribbon cable to the 44-pin
connector on the converter. The red edge of the ribbon
cable needs to line up to pin 1 marker of the 44-pin
connector. The other end of the ribbon cable will be
connected to your motherboard's 44-pin IDE channel.
TECHNICAL SUPPORT
Email:
http://www.addonics.com/sales/
Internet:
http://www.addonics.com
Technical Support (8:30 am to 6:00 pm PST)
Phone:
408 573-8580
Email:
http://www.addonics.com/support/ticketid/
44-pin IDE ribbon cable