Addonics Technologies ADSSSAI44 Installatiehandleiding

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Addonics Technologies ADSSSAI44. Addonics Technologies ADSSSAI44 1 pagina's.

Pagina afdrukken

Installation Guide

Front View

Screw hole

Slim ATAPI SATA

Power and

Data Connector

Pin 1 Marker

Master, Slave &

Cable Select

Jumpers

Jumper Settings

Master

Slave

Note:

To set the slim ATAPI SATA drive as a Master

Device when connected to an IDE channel, you

need to short the top pins located on the converter

by placing a jumper. As a Slave Device short the

middle pins.

ADDONICS TECHNOLOGIES

Model: ADSSSAI44

44-pin IDE Connector

Screw hole

Cable Select

Locate the slim SATA ATAPI connector of your optical

drive.

Connect the converter board to the Slim SATA ATAPI

connector of the optical drive. Secure the adapter using

screws.

(Optional) Connect the IDE ribbon cable to the 44-pin

connector on the converter. The red edge of the ribbon

cable needs to line up to pin 1 marker of the 44-pin

connector. The other end of the ribbon cable will be

connected to your motherboard's 44-pin IDE channel.

TECHNICAL SUPPORT

Email:

http://www.addonics.com/sales/

Internet:

http://www.addonics.com

Technical Support (8:30 am to 6:00 pm PST)

Phone:

408 573-8580

Email:

http://www.addonics.com/support/ticketid/

44-pin IDE ribbon cable