- ページ 4
ディスクアレイシステム Addonics Technologies SRDAP46SLのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Addonics Technologies SRDAP46SL 6 ページ。
ページを印刷するHow to Remove the 5 ¼"
Drive Bay Front Panels:
1.
Locate the 3 screws for each
front panel.
2.
Turn screws
counterclockwise to loosen.
3.
Pull the front panel forward,
away from the drive cage.
Thermal Management Card on the RAID Rack
Fan Connectors
Fan, Temperature and Power LED Connectors
Features:
Fan1 to Fan8 could be set either "ENABLE" or "DISABLE". When all the fans are set
on "DISABLE", the Fan LED will have no light on.
When Ambient temperature (or temperature inside the storage rack) is over the set
temperature, the LED will flash and the buzzer will sound.
3
www.addonics.com
3 screws for each panel
Overheat Buzzer
Floppy Power Connector
Ambient Detect Terminal
Temp. Setting
(40°C, 50°C, 60°C)
Fan Detect Selection
Technical Support (M-F 8:30am - 6:00pm PST)
At the bottom of the drive cage, locate the metal base corresponding to the storage
device inserted in the previous step and secure it onto the drive cage.
When you finished, install the drive cage now populated with the devices back
into the Storage Rack.
Phone: 408-453-6212
Email: www.addonics.com/support/query/
8