Addonics Technologies SRDAP46SL 사용자 설명서 - 페이지 4
{카테고리_이름} Addonics Technologies SRDAP46SL에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Addonics Technologies SRDAP46SL 6 페이지.
페이지 인쇄How to Remove the 5 ¼"
Drive Bay Front Panels:
1.
Locate the 3 screws for each
front panel.
2.
Turn screws
counterclockwise to loosen.
3.
Pull the front panel forward,
away from the drive cage.
Thermal Management Card on the RAID Rack
Fan Connectors
Fan, Temperature and Power LED Connectors
Features:
Fan1 to Fan8 could be set either "ENABLE" or "DISABLE". When all the fans are set
on "DISABLE", the Fan LED will have no light on.
When Ambient temperature (or temperature inside the storage rack) is over the set
temperature, the LED will flash and the buzzer will sound.
3
www.addonics.com
3 screws for each panel
Overheat Buzzer
Floppy Power Connector
Ambient Detect Terminal
Temp. Setting
(40°C, 50°C, 60°C)
Fan Detect Selection
Technical Support (M-F 8:30am - 6:00pm PST)
At the bottom of the drive cage, locate the metal base corresponding to the storage
device inserted in the previous step and secure it onto the drive cage.
When you finished, install the drive cage now populated with the devices back
into the Storage Rack.
Phone: 408-453-6212
Email: www.addonics.com/support/query/
8