- ページ 9

計測機器 Apogee 11056017のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Apogee 11056017 13 ページ。 Blot transfer systems

5.0 CARE AND HANDLING

Each apparatus is fabricated from high quality formed PVC/Acrylic and machined acrylic plastic. Both

have very good heat, impact, and chemical resistance but will not withstand autoclaving or dry-heat

sterilization.

All components may be washed with water and a detergent. To remove grease and oils, use a hexane,

kerosene, or aliphatic naphtha. Never use abrasive cleaners, window sprays, or any fluid that may

contain toluene, methylene chloride, phenol, acetone, benzene, halogenated hydrocarbon solvents, or

undiluted laboratory alcohols.

For replacement parts, call your distributor or Apogee Technical Support.

Type

Dimensions (W × L x H)

Weight

Gel Dimensions

Construction

Should you have any problems with this unit, please contact:

Apogee Designs, Ltd.

Attn: Electrophoresis Support

101 Kane Street

Baltimore, MD 21224 USA

Phone: 443.744.0368

Fax:

410.633.3666

Email:

IMPORTANT:

Before sending the unit back to us, it is absolutely necessary to call our Technical

Support department to get authorization to return products!



Return only defective devices. For technical problems which are not definitively recognizable as

device faults please contact Apogee Technical Support.

Apogee Electrophoresis | 101 Kane Street | Baltimore, MD 21224 USA | apogeephoresis.com

H11.14 Casting System

17.6  23.2  cm

0.37 kg

11 x 14 cm

PVC/Acrylic, acrylic

9 to 5PM EST, Monday through Friday

H20.25 Casting System

26.7 x 34.0 x 5.6 cm

0.72 kg

20 x 25 cm

PVC/Acrylic, acrylic