- ページ 11

ラボラトリー機器 DataApex Shodex RI-101のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。DataApex Shodex RI-101 18 ページ。 Clarity controls

4 Using the control module

4.1 Method Setup - Acquisition

The

Method Setup - Acquisition

parameters of the Shodex RI-101 detector. If more than one detector is

available, it is possible to select between them by using the Select

Detector combobox on the top of the dialog.

Sampling Period [s]

Defines the frequency of data being gathered in the detector. The

frequency of the data being sent to Clarity from the detector is defined by

Response Time parameter. Valid values for the Shodex RI-101 detector

range from 0.1 to 2.0 s.

Range for Integrator Output [µRIU/V]

Sets the output range for the Integrator Output analog output, as well as

digital signal sent to Clarity . The available range is dependent on the

Detector Model as set in the

Range for Recorder Output [µRIU/FS]

Sets the output range for the Recorder Output analog output, as well as

digital signal sent to Clarity.

Polarity of the Output Signals

Determines the polarity of the output signal.

Balance of the Output Signals [mV]

Defines the value to which the signal level will be reset when Autozero

function is used.

Fig 5: Method Setup - Acquisition

DataApex UNI Setup

tab serves for setting the common

dialog.

- 7 -

Clarity Controls