- ページ 3

計測機器 Datacolor 45のPDF クイック・スタート手順をオンラインで閲覧またはダウンロードできます。Datacolor 45 7 ページ。
Datacolor 45 にも：クイック・スタート手順 (11 ページ)

Stand Alone Operation

Starting the Instrument

To start the instrument, move the switch at the back of the instrument from the "0" position to the "|"

position. The instrument will boot up and the following screen will be displayed:

Standard Mode and Batch Mode

To simplify measurement the instrument has 2 basic modes for measurement. These are standard mode

and batch mode.

Standard Mode – The target icon represents standard mode. When this mode is selected on

the live bar, all measurements taken will be considered to be standards.

Batch Mode – The dart icon represents batch mode. When this mode is selected on the live

bar, all measurements taken will be considered batches to the current standard.

Datacolor 45 Quick Start Guide v1.0 – 003‐400063

This is the main QC screen. The top section is the where you

can select standards, output displays and the

illuminant/observer.

The middle section is where the output is displayed. In this

start‐up screen, the absolute CIEL*a*b* data for all models

and gloss value for the 45G CT or 45G for the standard is

displayed. The instrument will have one standard named

"Demo Standard" stored. This display will change

depending on whether you are in standard mode or batch

mode. In standard mode, you will see absolute data and in

batch mode you will see delta or difference data.

The bottom section contains the "live bar" which contains a

horizontal list of icons which control and start various

program options. You can traverse the live bar by using the

left and right arrows on the instrument.