Datacolor 45 Snel aan de slag Instructies - Pagina 3
Blader online of download pdf Snel aan de slag Instructies voor {categorie_naam} Datacolor 45. Datacolor 45 7 pagina's.
Ook voor Datacolor 45: Snel aan de slag Instructies (11 pagina's)
Pagina afdrukken
Stand Alone Operation
Starting the Instrument
To start the instrument, move the switch at the back of the instrument from the "0" position to the "|"
position. The instrument will boot up and the following screen will be displayed:
Standard Mode and Batch Mode
To simplify measurement the instrument has 2 basic modes for measurement. These are standard mode
and batch mode.
Standard Mode – The target icon represents standard mode. When this mode is selected on
the live bar, all measurements taken will be considered to be standards.
Batch Mode – The dart icon represents batch mode. When this mode is selected on the live
bar, all measurements taken will be considered batches to the current standard.
Datacolor 45 Quick Start Guide v1.0 – 003‐400063
This is the main QC screen. The top section is the where you
can select standards, output displays and the
illuminant/observer.
The middle section is where the output is displayed. In this
start‐up screen, the absolute CIEL*a*b* data for all models
and gloss value for the 45G CT or 45G for the standard is
displayed. The instrument will have one standard named
"Demo Standard" stored. This display will change
depending on whether you are in standard mode or batch
mode. In standard mode, you will see absolute data and in
batch mode you will see delta or difference data.
The bottom section contains the "live bar" which contains a
horizontal list of icons which control and start various
program options. You can traverse the live bar by using the
left and right arrows on the instrument.
3