- ページ 16
スイッチ Datacom Systems 4X16SP-1000BTのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Datacom Systems 4X16SP-1000BT 20 ページ。 Copper gigabit span switch
Datacom Systems 4X16SP-1000BT にも: 仕様書 (1 ページ)
16
IMPORTANT: The maximum length of 100 meters must not be exceeded between end-points.
Step 2. Connect network cables from the SPAN port of each network device to each
of the desired 4X16SP-1000BT Copper Gigabit SPAN Switch RJ45 port
NETWORK PORT connectors. These connectors have integrated LEDs that
display status of each port. See Table 3 for LED display. The NETWORK
PORT LED illuminates indicating link has been established between the
NETWORK PORT connector and network device SPAN port.
Left LED — Notch Up
Solid Green — Link
Flashing Green — Data
Green — 1,000 Mbs
Orange — 100 Mbs
OFF — 10 Mbs
Left LED — Notch Down
Table 3 - LED Display
!! NOTE: The monitor tool has to match the selected network speed and duplex !!
Step 3. Connect the COMMON A PORT of the first 4X16SP-1000BT RJ45 connec-
tor to the network tool Network Interface Card (NIC) port connector using a
DRL366-3 cable. These connectors have integrated LEDs that display status
of each port. See Table 3 for LED display. The COMMON A PORT link
LED illuminates indicating link has been established between both devices.
Connect COMMON B through COMMON D connectors to other network
tools as desired. using DRL366-3 cables and noting link LED illuminates indi-
cating link has been established between both devices.
Step 4. Connect the DAISY A PORT of the first 4X16SP-1000BT RJ45 connector to
the COMMON A PORT of the second 4X16SP-1000BT RJ45 connector using
a DRL366-3 cable. These connectors have integrated LEDs that display status
of each port. See Table 3 for LED display. The COMMON A PORT link LED
4X16SP-1000BT Copper Gigabit SPAN Switch • USERguide
Datacom Systems Inc
LED Display
NOTCH UP
Right LED — Notch Up
Green — 1,000 Mbs
Orange — 100 Mbs
OFF — 10 Mbs
Solid Green — Link
Flashing Green — Data
NOTCH DOWN
Right LED — Notch Down
WITH LINK OR DATA
WITH LINK OR DATA