- ページ 3

送信機 Elsema GLT2716のPDF 操作説明をオンラインで閲覧またはダウンロードできます。Elsema GLT2716 4 ページ。 2-stroke 16-channel gigalink transmitter

Technical Data

Power Supply 9V Battery (Applied to the battery clip)

Current Consumption Max 45mA at 8VDC supply (Only when transmitting)

Standby Current 10uA (Typical)

Transmission Modes Burst: Transmits one 640ms burst for each channel activation,

Battery Monitor LED flashes at 1Hz, during transmission, when battery voltage

Operating Frequency 27.195MHz

Carrier Frequency Tolerance Crystal controlled 30 parts per million

Operating Temperature

Radiated RF Power Output 76.5 dBuV/m at 3m

Type of Emission Narrow-bandwidth Frequency Modulation (5K00F1D)

Freq Deviation Limiting 1600 - 1900Hz non-return to zero

Modulation Freq 1.8kHz (0.56 ms/bit) (15% tolerance)

Spurious Transmission At least -60dB / carrier

Necessary Bandwidth ±2.5kHz

Digital Coding System Microcontroller based 96-bit word

Code Combination 4,294,967,296

Digital Channels 16 channels. Each channel has 2 numbers assigned

Dimension 81 x 56 x 24mm

Useable Receivers GLR... series

Useable Operating Range Up to 350m; depending on receiver antenna and location

Customised labels

Customers can also fit their custom made labels.

Customers who wish to have their own membranes

can contact us with their designs on (+61) 2 9609

4668

You can have your own company logo and specific

text printed on the membranes. e.g. Up, Down,

Right and Left or Start, Stop etc.

The minimum quantity for custom membranes is

50 pieces per order

even if channel is activated for less than 640ms

is at 6.5V (flat 9V battery)

-5 to 50°C

Range

Antenna Built-in 50mm long dilec rod

Weight 51g excluding battery

2-Stroke 16-Channel 27MHz Gigalink™ Transmitter – GLT2716

REGULATORY COMPLIANCE

ELSEMA