Elsema GLT2716 운영 지침 - 페이지 3
{카테고리_이름} Elsema GLT2716에 대한 운영 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Elsema GLT2716 4 페이지. 2-stroke 16-channel gigalink transmitter
페이지 인쇄Technical Data
Power Supply 9V Battery (Applied to the battery clip)
Current Consumption Max 45mA at 8VDC supply (Only when transmitting)
Standby Current 10uA (Typical)
Transmission Modes Burst: Transmits one 640ms burst for each channel activation,
Battery Monitor LED flashes at 1Hz, during transmission, when battery voltage
Operating Frequency 27.195MHz
Carrier Frequency Tolerance Crystal controlled 30 parts per million
Operating Temperature
Radiated RF Power Output 76.5 dBuV/m at 3m
Type of Emission Narrow-bandwidth Frequency Modulation (5K00F1D)
Freq Deviation Limiting 1600 - 1900Hz non-return to zero
Modulation Freq 1.8kHz (0.56 ms/bit) (15% tolerance)
Spurious Transmission At least -60dB / carrier
Necessary Bandwidth ±2.5kHz
Digital Coding System Microcontroller based 96-bit word
Code Combination 4,294,967,296
Digital Channels 16 channels. Each channel has 2 numbers assigned
Dimension 81 x 56 x 24mm
Useable Receivers GLR... series
Useable Operating Range Up to 350m; depending on receiver antenna and location
Customised labels
Customers can also fit their custom made labels.
Customers who wish to have their own membranes
can contact us with their designs on (+61) 2 9609
4668
You can have your own company logo and specific
text printed on the membranes. e.g. Up, Down,
Right and Left or Start, Stop etc.
The minimum quantity for custom membranes is
50 pieces per order
even if channel is activated for less than 640ms
is at 6.5V (flat 9V battery)
-5 to 50°C
Range
Antenna Built-in 50mm long dilec rod
Weight 51g excluding battery
2-Stroke 16-Channel 27MHz Gigalink™ Transmitter – GLT2716
.
REGULATORY COMPLIANCE
ELSEMA