- ページ 7

ホットタブ Duscholux CPL1のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Duscholux CPL1 19 ページ。 Whirlpool

BEFORE USE

Switch the mains isolation switch on and fill the whirlpool.

Cleaning and blowing-out

Empty the whirlpool. A blow-out program starts automatically about 15 min later to dry the pipes.

Switch off the mains cut-off switch once the automatic blow-out program has finished.

The tub should be cleaned every time it is used. We recommend our Duscholux tub cleaner, available

from plumbing supply dealers. The blow-out program can also be started manually if required:

switch on the all-phase mains cut-off switch,

press the air system button and let the air system run for approx. 2 min.

Disinfection

Duscholux whirlpool disinfectant is ideal for disinfection. For more information on

the disinfectant and how to handle it, see the bottle label / instruction leaflet,

or ask your plumber or service technician.

You can also use the following overview to determine the amount of disinfectant required for your

bath tub:

Disinfectant dose per 100 litres bath water

(Water volume in accordance with supplier specifications)per 100 litres of water (water volume)

for initial treatment approx. 375 ml

Legionella prevention approx.110-150 ml

Ongoing disinfection (about once per week) approx. 100 ml

Germ infestation and special disinfection* approx. 650 ml

*Special disinfection

Every 10th disinfection process should be carried out as a special disinfection.

This prevents resistance to the disinfectant developing.