- ページ 2
コントロールユニット Elsner MSG1-UPのPDF 技術仕様と設置手順をオンラインで閲覧またはダウンロードできます。Elsner MSG1-UP 6 ページ。 Motor control unit
ページを印刷する1.
Description
The Motor Control Unit MSG1-UP controls 230 V drives, e.g. shading or window
motors. The relay at the motor output is a low-wear zero-crossing switch.
The device is equipped with inputs for central control and for a manual switch. The cen-
tral input can be set to dead man's switch or lock and is suitable e. g. for timers, push
buttons or control systems. An unlocked twin push button is connected to the switch
input for manual operation. This input is equipped with time-automated buttons (step
operation/lock).
Functions:
•
For a 230 V drive (Up/Down)
•
Input for central control
•
Input for manual operation
•
Setting the central control unit to "Dead man" or "Lock". As long as voltage is
present at the central input, the manual operation is blocked
•
Direction change pause 1 second
1.1. Technical specification
Assembly
Protection category
Dimensions
Weight
Ambient temperature
Operating voltage
Output
Inputs
The product conforms with the provisions of EU directives.
2.
Installation and start-up
2.1. Installation notes
Installation, testing, operational start-up and troubleshooting should
only be performed by an electrician.
Motor Control Unit MSG1-UP • Version: 03.03.2016 • Errors and technical modifications subject to change without notice3
2
Installation
IP 00
approx. 38 x 47 x 28 (W x H x D, mm)
approx. 60 g
Operation -20...+70 °C, storage -55...+90°C.
Avoid condensation
230 V AC
1× 230V drive (Up/Down/PE/N),fused with 4 A T
1× Central command (Up/Down/+/-)
1× Manual command via present button (Up/Down/+/-)
Voltage for inputs 8...28 V
Maximum line length 100 m
Description