- ページ 8

コントローラー CB ELECTRONICS TMC-1のPDF セットアップマニュアルをオンラインで閲覧またはダウンロードできます。CB ELECTRONICS TMC-1 14 ページ。 Connecting with yamaha mmp1
CB ELECTRONICS TMC-1 にも：ユーザーマニュアル (10 ページ)

ページを印刷する

Setting up the system

To set the TMC-1 operation mode

Press the [Page] and [Select] keys simultaneously to display the Select Page.

Press User Key 8 "Setup" to display the Setup Menu.

While holding down the [Select] key, press User key 4 "→" to display the Adv Menu

24 - MMP1 Device Emulation page.

Use the User Keys 3 "↑" and 7 "↓" to select the "MMP1 Compliant" mode.

To connect TMC-1 to MMP1

If you want to connect the TMC-1 to the MMP1 using IP addresses other than Auto IP, see "To

set IP addresses" on page 9 to set the IP addresses according to your system before

connecting them.

1. Press the [Page] and [Select] keys simultaneously to display the Select Page.

Press User Key 6 "E-Net" to display the Discovery page.

All the devices in the same network will be shown on the Discovery page. If no devices are

detected, press User Key 5 "Re-Scan" to start the detection again.