CB ELECTRONICS TMC-1 Installatiehandleiding - Pagina 8

Blader online of download pdf Installatiehandleiding voor {categorie_naam} CB ELECTRONICS TMC-1. CB ELECTRONICS TMC-1 14 pagina's. Connecting with yamaha mmp1
Ook voor CB ELECTRONICS TMC-1: Gebruikershandleiding (10 pagina's)

Pagina afdrukken

Setting up the system

To set the TMC-1 operation mode

Press the [Page] and [Select] keys simultaneously to display the Select Page.
1.
Press User Key 8 "Setup" to display the Setup Menu.
2.
While holding down the [Select] key, press User key 4 "→" to display the Adv Menu
3.
24 - MMP1 Device Emulation page.
Use the User Keys 3 "↑" and 7 "↓" to select the "MMP1 Compliant" mode.
4.

To connect TMC-1 to MMP1

If you want to connect the TMC-1 to the MMP1 using IP addresses other than Auto IP, see "To
set IP addresses" on page 9 to set the IP addresses according to your system before
connecting them.
1. Press the [Page] and [Select] keys simultaneously to display the Select Page.
Press User Key 6 "E-Net" to display the Discovery page.
2.
All the devices in the same network will be shown on the Discovery page. If no devices are
detected, press User Key 5 "Re-Scan" to start the detection again.
8