- ページ 5

室内装飾品 CB2 HYDEのPDF 組み立て説明書をオンラインで閲覧またはダウンロードできます。CB2 HYDE 5 ページ。 Square open wall ccabinet
CB2 HYDE にも：組み立て説明書 (4 ページ), 組み立て説明書 (4 ページ)

ページを印刷する

hyde

SQUARE WALL CABINET

wall attachment assembly

wall template

wall attachment

bracket pre-installed

on wall console

WALL

NOTE: Make sure arm hinge is orientated on

top and door opens to the left during wall

attachment assembly

wall bracket

Made in Vietnam - r04

VERTICAL DOOR

ORIENTATION

wall attachment

bracket

BACK OF

ASSEMBLY

The wall mounting hardware included with this wall console is intended for drywall

installation only. Be sure to use hardware appropriate for your wall type. Whenever

possible, fasten screws directly into a wall stud. If you are unsure about your wall type or

what mounting method you should use, consult a qualified professional or your local

hardware store.

1. Determine the wall console orientation (vertical or horizontal door) and wall

location. Using a level for the provided

wall bracket as shown.

2. If attaching directly into wall studs, skip to Step 4.

3. For drywall installation, drill a hole slightly smaller in diameter than the anchor. Insert 1

plastic anchor at each marked hole location and gently tap with a hammer until the head

of each anchor is flush to the wall surface.

4. Insert 1 large screw through each hole in the wall bracket and into the corresponding

anchors or studs in the wall. Fully tighten each screw with a phillips head screwdriver

but do not over tighten.

5. With the assistance of another adult, fit the bracket on the back of the unit onto the wall

bracket. Make sure the unit is firmly seated in the wall bracket.

Wall attachment is now complete.

Customer Service 800.606.6252 | Latest instructions available on www.cb2.com

wall template

wall attachment

bracket

BACK OF

ASSEMBLY

wall template, level and mark hole positions for

Discard wall template.

HORIZONTAL DOOR

ORIENTATION

wall attachment

bracket pre-installed

on wall console

WALL

NOTE: Make sure arm hinge is

orientated on the right and door

opens upward during wall

attachment assembly

Page 5 of 5