- ページ 8

体重計 ADE GW400-30のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。ADE GW400-30 16 ページ。 Electronic compact scales

Zeroing

Press the

key when the scale shows a weight, even though the weighing surface is

completely empty. The display of the scale shows 0.00 again.

The zero position is indicated by the symbol >0< on the display.

With this function, the user can weigh objects together with other items (such as containers, film

or paper towels), without the weight of those items affecting the weighing result.

Switch on the scale.

Place an empty container on the scale and press the

arrow indicates the net weight mode with NET icon. As soon as you place the item to be

weighed in the container, only the net weight of the item to be weighed is displayed.

Now carry out any number of weighing operations. When the tared container is on the weighing

surface, the display shows only the net weighing results.

If you remove the tared container with the items to be weighted from the weighing surface, the

tare weight will be displayed as a negative value.

Pressing the

key after unloading the weighing surface clears the tare weight.

If the display is not stable, the arrow will not light up on the stability indicator ~.

Scale display backlight can be enabled and disabled manually by the user. With the backlight

activated, the weighing results are more clearly visible on the display, but the battery is discharged

faster.

The scale has three different backlight setting options:

OFF (bk oF):

The backlight is switched off permanently.

ON (bk on):

The backlight is switched on permanently.

AUTO (bk AU):

The backlight switches on automatically when the weighing surface is

loaded or after pressing a key; or switches off again after a short period

without moving weight or pressing a key.

To set the backlight, please proceed as described below:

When in weighing mode, press and hold down the

current setting is displayed. Press the

selection with the

When the scale is switched off, the last settings done are saved.

key.

key. The display shows "0" and the

key for approx. 2 seconds until the

key again to change the setting. Confirm your

GW400-210408-Rev004-UM-en