- ページ 9

体重計 ADE GW400-30のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。ADE GW400-30 16 ページ。 Electronic compact scales

Changing automatic switch-off time

In order to change the automatic switch-off time, it is necessary to open a secure menu.

Open the menu only when you really have to. Accidental or

intentional changes to the parameters can have a significant impact

on the functionality of the scale.

To enter the secure menu, press and hold down the

switch on the scale and after it has switched on.

The parameter menu has 12 functions. The display shows the names of functions ("CAL",

"rES", "CAP", "Cnt", "GrA", "CoM", "bAUd", "oFF", "SPEEd", "MtArE", "rESt" and "bACk"). You

can navigate through these functions by repeatedly pressing the

press the

key. You can navigate through the values of this function by repeatedly

pressing the

key. To save your selection, press the

The menu can be exited by selecting the "bACk" parameter and pressing the

Caution: On calibrated scales, various functions such as "CAL" and "GrA" are locked. A

change leads to the loss of the calibration and is only reserved for qualified personnel

authorised by the manufacturer.

Indicator

Description

Setting the automatic switch-off time. The automatic switch-off time can be

set to 3, 5, 15 or 30 minutes ("oF 3", etc.) or the automatic switch-off function

oFF

can be disabled ("oF 0"). Press the

value. Press the

confirm the displayed value.

Disconnect the mains plug before cleaning the scale. Use only a damp cloth or an ordinary

disinfectant for cleaning. Do not use aggressive liquid cleaning agents, abrasive or acidic

detergents or white spirit.

Make sure that no liquid cleaning agent or water penetrates the scale and always follow the

manufacturer's instructions for use.

GW400-210408-Rev004-UM-en

key to set the desired value. Press the

key until "CAL" is displayed as you

key. To select a function,

key.

key to retrieve the currently set

key.

key to