- ページ 2

PCIカード Datapath VisionLC-HDのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Datapath VisionLC-HD 2 ページ。 Dual and single channel live capture cards
Datapath VisionLC-HD にも：ユーザーマニュアル (15 ページ)

ページを印刷する

PACKING LIST

Your packing box should contain the following items:

The VisionLC-HD - Single channel live capture card.

Half height bracket.

Installation CD-ROM.

(For latest drivers go to www.datapath.co.uk).

NOTE:

All plug-in cards are static sensitive and are packed in

antistatic materials. Please keep the card in its

packaging until you are ready to install.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and (2)

this device must accept any interference received,

including interference that may cause undesired

HARDWARE INSTALLATION

You are likely to need a flat blade and/or a cross head

screwdriver for the installation of the VisionLC-HD card; it

would be useful to have these to hand before you begin.

Power down the PC (including peripherals), switch off at

the mains and disconnect all the cables connected to the

computer, noting the positions for accurate reconnection

Remove the PC cover.

Locate a vacant PCIe slot (x4 or higher) on the motherboard

and remove the backing plate (retain all screws) .

If in doubt consult your motherboard documentation to

correctly identify a PCIe (PCI-express) slot. If the card is

forced into a 32 or 64 bit PCI or PCI-X slot it will be

irreparably damaged when the system is powered up and

the warranty will be void.

Remove the VisionLC-HD card from its packaging and

secure it firmly into the empty PCIe slot.

Screw the VisionLC-HD bracket to the back panel of the

PC and replace the cover. Connect the cable (not supplied)

distributing the signals to the connectors on the

VisionLC-HD card.

Reconnect all cables to the PC.

SOFTWARE INSTALLATION

Insert the Datapath CD into your CD drive, the CD will

autorun and display the following dialogue. If the CD

drive fails to autorun browse the CD and locate and

double click the setup.exe file.

Click on Install Drivers... and follow the installation

Wizard instructions as prompted.

We suggest that you regularly visit the Datapath web site

for information on updated drivers.

www.datapath.co.uk

It is strongly recommended that you read the detailed

help instructions on completion of the installation. Each

help topic may be printed for ease of use.