- ページ 13

スイッチ Dataprobe IP-410 -のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Dataprobe IP-410 - 17 ページ。 Web controlled power switches

iPAL

Web Browser Operation

iPAL can be accessed by any Web Browser.

To access iPAL, address your browser to the

IP address set in iPAL. As shown in the

screen right, this browser is connected to iPAL

with address 192.168.1.195. You can add

iPAL locations to your Bookmarks or Favorite

Places and name them as convenient. When

connected, the Password screen is displayed.

Enter the Password (no User Name is

necessary) as set in the Telnet configuration.

Remember; the password is case sensitive.

When the password is properly entered, click

OK. This brings up the Control and Status

screen:

This screen provides all the control

and status information required.

To change the status of any outlet,

simply click on the hotlink marked

Change next to that circuit

To Cycle (change the status for a

period of time) any outlet click on the

Cycle hotlink next that circuit. A

"Cycling" message will be displayed,

along with the temporary status while

cycling. The duration of the cycling is

determined during setup and

displayed on the bottom of the

screen. It can not be changed

through the web page.

Page 13