Dataprobe IP-410 - Manual - Page 13
Browse online or download pdf Manual for Switch Dataprobe IP-410 -. Dataprobe IP-410 - 17 pages. Web controlled power switches
iPAL
Web Browser Operation
iPAL can be accessed by any Web Browser.
To access iPAL, address your browser to the
IP address set in iPAL. As shown in the
screen right, this browser is connected to iPAL
with address 192.168.1.195. You can add
iPAL locations to your Bookmarks or Favorite
Places and name them as convenient. When
connected, the Password screen is displayed.
Enter the Password (no User Name is
necessary) as set in the Telnet configuration.
Remember; the password is case sensitive.
When the password is properly entered, click
OK. This brings up the Control and Status
screen:
This screen provides all the control
and status information required.
To change the status of any outlet,
simply click on the hotlink marked
Change next to that circuit
To Cycle (change the status for a
period of time) any outlet click on the
Cycle hotlink next that circuit. A
"Cycling" message will be displayed,
along with the temporary status while
cycling. The duration of the cycling is
determined during setup and
displayed on the bottom of the
screen. It can not be changed
through the web page.
Page 13