- ページ 9

除湿機 AusClimate AU0700DDのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AusClimate AU0700DD 13 ページ。 Ausclimate cool seasons premium 10l desiccant dehumidifier
AusClimate AU0700DD にも：ユーザーマニュアル (13 ページ)

ページを印刷する

1. Troubleshooting

TO EMPTY THE WATER BUCKET

1. When the water bucket is full, the "FULL" LED lights up and the unit stops within

a few minutes.

2. Do not move the unit or remove the water bucket if the machine is still operating.

Water may leak and cause damage to the unit or cause an electric shock.

3. To remove the water bucket, pull it out by gripping the bottom of the bucket, and

lift carefully.

4. Remove the cover of water bucket first, then pour the water away. Clean the

bucket and return the cover and the bucket to the correct position.

Pull bucket out

Return the cover

and the handle

NOTE :

Clean the water bucket with clean water if needed. Do not

use solvents, abrasive materials or hot water.

Do not remove or damage the float in the bucket, or the unit

cannot work correctly.

The bucket cover must be correctly fitted into position.

The "FULL" LED lights up if the bucket is not correctly fitted

into position.

TO DRAIN WATER

You may use 2 methods to remove the collected water: water

bucket or drain hose.

A drain hose with an inner diameter of 12mm is quite suitable for

continuous drainage (1.2M drain hose is included):

1. Use a screwdriver to remove the 'knockout' at the back of

the unit. Attach the tubing to the connector through the hole.

2. The drain hose should lead downwards away from the unit,

with no sharp bends to ensure uninterrupted drainage.

Lift by the handle

Remove the cover

Pour the water away

Return the bucket