AusClimate AU0700DD 사용자 설명서 - 페이지 9
{카테고리_이름} AusClimate AU0700DD에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AusClimate AU0700DD 13 페이지. Ausclimate cool seasons premium 10l desiccant dehumidifier
AusClimate AU0700DD에 대해서도 마찬가지입니다: 사용자 설명서 (13 페이지)
페이지 인쇄
TO EMPTY THE WATER BUCKET
1. When the water bucket is full, the "FULL" LED lights up and the unit stops within
a few minutes.
2. Do not move the unit or remove the water bucket if the machine is still operating.
Water may leak and cause damage to the unit or cause an electric shock.
3. To remove the water bucket, pull it out by gripping the bottom of the bucket, and
lift carefully.
4. Remove the cover of water bucket first, then pour the water away. Clean the
bucket and return the cover and the bucket to the correct position.
Pull bucket out
Return the cover
and the handle
NOTE :
Clean the water bucket with clean water if needed. Do not
use solvents, abrasive materials or hot water.
Do not remove or damage the float in the bucket, or the unit
cannot work correctly.
The bucket cover must be correctly fitted into position.
The "FULL" LED lights up if the bucket is not correctly fitted
into position.
TO DRAIN WATER
You may use 2 methods to remove the collected water: water
bucket or drain hose.
A drain hose with an inner diameter of 12mm is quite suitable for
continuous drainage (1.2M drain hose is included):
1. Use a screwdriver to remove the 'knockout' at the back of
the unit. Attach the tubing to the connector through the hole.
2. The drain hose should lead downwards away from the unit,
with no sharp bends to ensure uninterrupted drainage.
Lift by the handle
Remove the cover
Pour the water away
Return the bucket
8