- ページ 8

除湿機 AusClimate WDH-930DAのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AusClimate WDH-930DA 14 ページ。

CONTINUOUS DRAINAGE OPTIONS

The continuous drainage function can be started in the following steps when there is suitable

conditions for drainage near the dehumidifier.

1. To save having to periodically empty the water

tank, this unit can be configured for continuous

drainage. You can use the supplied drain hose

to connect to the continuous drainage connector.

2. Unscrew and remove the drain cover at the rear

of the unit.

3. Remove the soft rubber stopper. Put it into the

water tank for safe keeping.

4. Insert the drain hose through the hole of the

drain cover.

5. Connect the drain hose to the drain port.

6. Tighten the drain cover in clockwise direction

onto the rear of the unit.

7. Place the bucket on its original location.

INSTALLING DRAINAGE HOSE

When using continuous drainage, the drain hose must be placed horizontally below the level

of the drainage hole. Avoid uneven ground and kinking the hose.

Drain hose

Drain cover

Drain hose

Back of the unit

Drain cover

Soft rubber

stopper

Drain cover

Drain hose

Bucket