AusClimate WDH-930DA 사용자 설명서 - 페이지 8

{카테고리_이름} AusClimate WDH-930DA에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AusClimate WDH-930DA 14 페이지.

CONTINUOUS DRAINAGE OPTIONS

The continuous drainage function can be started in the following steps when there is suitable

conditions for drainage near the dehumidifier.

1. To save having to periodically empty the water

tank, this unit can be configured for continuous

drainage. You can use the supplied drain hose

to connect to the continuous drainage connector.

2. Unscrew and remove the drain cover at the rear

of the unit.

3. Remove the soft rubber stopper. Put it into the

water tank for safe keeping.

4. Insert the drain hose through the hole of the

drain cover.

5. Connect the drain hose to the drain port.

6. Tighten the drain cover in clockwise direction

onto the rear of the unit.

7. Place the bucket on its original location.

INSTALLING DRAINAGE HOSE

When using continuous drainage, the drain hose must be placed horizontally below the level

of the drainage hole. Avoid uneven ground and kinking the hose.

Drain hose

Drain cover

Drain hose

Back of the unit

Drain cover

Soft rubber

stopper

Drain cover

Drain hose

Bucket