- ページ 4
自動車アクセサリー dvblogic TF-MFD3のPDF マニュアルをオンラインで閲覧またはダウンロードできます。dvblogic TF-MFD3 5 ページ。 Tv-free video-in-motion interface for volkswagen mfd3/rns510, skoda columbus and seat trinax navigation systems
ページを印刷する
Pin-assignment of the CAN-Box TV-500 (Molex 8pin)
Cable colour
Pin-No. Assignment
●
Yellow
Pin 4
●
Blue
Pin 3
●● Yellow/Black Pin 8
●● Blue/Black
Pin 7
●
Red
Pin 1
●
Black
Pin 5
●
Green
Pin 6
●
White
Pin 2
2. Installation
Switch off ignition and disconnect the vehicle's battery! If according to factory rules
disconnecting the battery has to be avoided, it is usually sufficient to put the vehicle is
sleep-mode. In case the sleep-mode does not show success, disconnect the battery with a
resistor lead.
Instruction for VW Golf 5, Touran with MFD3/RNS510:
1. Remove decorative plastic panels of the navigation
computer carefully, remove the 4 TORX screws and pull the
navigation computer out of the centre console with the
accordant tool kit (not included).
2. Disconnect Quadlock connector from the backside of the
navigation computer and connect it to harness TV-VW02. If
the original Quadlock connector carries 12pin inserts,
disconnect the inserts and connect them to harness TV-VW02.
Connect TV-VW02 to the navigation computer.
Version 29.01.2013
CAN-HIGH – connection to the head-unit
CAN-LOW – connection to the head-unit
CAN-HIGH – connection to the vehicle
CAN-LOW – connection to the vehicle
+12V permanent
Ground
Activation of the video-in-motion function
(+12V = TV-free activated)
Trigger output (+12V DC 500mA)
TF-MFD3