- ページ 12

コントローラー Datavideo MCU-100のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Datavideo MCU-100 18 ページ。 Multi-camera controllers for panasonic cameras
Datavideo MCU-100 にも：クイック・スタート・マニュアル (2 ページ)

ページを印刷する

1. Connections and Controls

Seven segment display and LEDs

Indicates the displayed format of SHUTTER value.

LED

LED ON : Shutter angle is displayed.

Deg

LED OFF: Shutter speed is displayed.

SHTR

When LED ON displays SHUTTER (speed) value.

GAIN

When LED ON displays GAIN value (in dB).

FILTER

When LED ON displays ND FILTER mode (F1~F5).

Operation Modes – LOCK and NORMAL

There are two modes of operation on the MCU-100.

1. NORMAL: This is always active when the unit is first turned on. Under this mode all

functions are available. Buttons not back lit indicate functions that are currently not in use.

The user may activate these functions via an associated ENABLE button.

2. LOCK: This mode is activated by pressing and holding down the CHECK button for two

seconds. When in LOCK mode all functions are unavailable except for the 4 Camera

selection buttons and the CHECK function. This is to prevent unauthorized or unintended

operation during a LIVE production. The seven segment LED display will also show Lock.

Iris controls can be quickly accessed in LOCK mode by pressing down on the IRIS Dial once;

press the dial again to return to full lock mode. When the Iris function is accessed in this way,

if the MCU-100 unit is left idle for 3 seconds or more then the unit will automatically return to

full Lock mode.

The Lock mode can be deactivated by pressing and holding down the CHECK button for two

seconds.