- ページ 8

グリル Cook's essentials CM-GR103SAのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Cook's essentials CM-GR103SA 18 ページ。 Electric bbq grill

Assembly Instructions

NOTE: In each step described below, tighten all connections by hand first. Once assembly is complete,

tighten all connections fully.

Step 1 – Attach Pillar (part #13) to Base (part #14)

Hardware:

M6*20 medium screws (part #18) – 4 pcs

flat washers (part #23) – 4 pcs

lock washers (part #22) – 4 pcs

Locate the Pillar and the Base. Set aside four (4) M6*20 medium screws, four (4) lock washers and four

(4) flat washers. Place a lock washer and then a flat washer on each screw. Put the Pillar on the Base as

shown below, and align the holes. From the underside of the Base, screw the Base to the Pillar using

the lock washers, flat washers and medium screws.

Step 2 - Connection Part (part #11)

Hardware:

M6*20 medium screws (part #18) – 4 pcs

flat washers (part #23) – 4 pcs

lock washers (part #22) – 4 pcs

Place the Base on flat ground. Locate the Connection Part. Set aside

four (4) M6*20 medium screws, four (4) lock washers and four (4) flat

washers. Place a lock washer and then a flat washer on each screw.

Put the Connection Part on the Pillar as shown here, and align the

holes. Screw the Connection Part to the Pillar using the lock washers,

flat washers and medium screws.