Cook's essentials CM-GR103SA Instrukcja obsługi - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla grill Cook's essentials CM-GR103SA. Cook's essentials CM-GR103SA 18 stron. Electric bbq grill
Drukuj stronę
Assembly Instructions
NOTE: In each step described below, tighten all connections by hand first. Once assembly is complete,
tighten all connections fully.
Step 1 – Attach Pillar (part #13) to Base (part #14)
Hardware:
M6*20 medium screws (part #18) – 4 pcs
flat washers (part #23) – 4 pcs
lock washers (part #22) – 4 pcs
Locate the Pillar and the Base. Set aside four (4) M6*20 medium screws, four (4) lock washers and four
(4) flat washers. Place a lock washer and then a flat washer on each screw. Put the Pillar on the Base as
shown below, and align the holes. From the underside of the Base, screw the Base to the Pillar using
the lock washers, flat washers and medium screws.
Step 2 - Connection Part (part #11)
Hardware:
M6*20 medium screws (part #18) – 4 pcs
flat washers (part #23) – 4 pcs
lock washers (part #22) – 4 pcs
Place the Base on flat ground. Locate the Connection Part. Set aside
four (4) M6*20 medium screws, four (4) lock washers and four (4) flat
washers. Place a lock washer and then a flat washer on each screw.
Put the Connection Part on the Pillar as shown here, and align the
holes. Screw the Connection Part to the Pillar using the lock washers,
flat washers and medium screws.
6