- ページ 8
ミキサー AUSTRALIAN MONITOR ES SeriesのPDF 設置および操作マニュアルをオンラインで閲覧またはダウンロードできます。AUSTRALIAN MONITOR ES Series 13 ページ。 Rackmount mixer
AUSTRALIAN MONITOR ES Series にも： 操作マニュアル (17 ページ)
ページを印刷するINSTALLATION
Minimum total
speaker impedance
8
ES SERIES INSTALLATION AND OPERATION MANUAL
LINE OUTPUT
The LINE output XLR can be used to connect up to 6 booster amplifiers.
Balanced wiring (shielded pair cable) is recommended.
NOTE: When wiring the LINE output as unbalanced, Pin2 should be wired as hot
and Pin1 should be wired as ground/shield. Do not wire Pin3.
REC OUTPUT
The REC output wiring should be kept as short as possible.
INPUT CONNECTIONS
For wiring balanced in, pin 2 is hot. Unbalanced wiring on the microphone inputs
is not recommended.
Balanced input wiring (shielded pair cable) is recommended. Unbalanced RCA
wiring should be keep as short as possible.
Female XLR
Pin1 Gnd
Pin3 Cold -
Pin2 Hot +
Male XLR
Pin2 Hot +
Pin3 Cold -
Pin1 Gnd
RCA
Tip: Hot +
Shield: Gnd