- ページ 9

ミキサー AUSTRALIAN MONITOR ES SeriesのPDF 設置および操作マニュアルをオンラインで閲覧またはダウンロードできます。AUSTRALIAN MONITOR ES Series 13 ページ。 Rackmount mixer
AUSTRALIAN MONITOR ES Series にも：操作マニュアル (17 ページ)

ページを印刷する

TROUBLESHOOTING

TROUBLE

Power LED not on

Distorted sound

No sound but amplifier is on

No sound from channels 3 and 4

Tones do not sound when triggered

LIKELY CAUSE

Power not reaching mixer

Input is overloaded

Output is being over driven

Bass control is turned up

Volume controls down

Priority function is being used

Tone generator volume too low

ES SERIES INSTALLATION AND OPERATION MANUAL

REMEDY

Check power switch is on

Check power supply is connected

Reduce input level at source

Reduce volume levels on front panel

Reduce Bass control level

Check volume controls

Remove signal (disconnect input) from

channel 1 and 2

Disable priority function using DIP switches

on the rear panel.

Increase the volume by turning the tone

volume clockwise