- ページ 5

ケトル Cookworks KE01318-CEのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Cookworks KE01318-CE 9 ページ。 Selcey diamond kettle

TO USE

1. Place the kettle with base on a stable, flat, heat resistant

surface and away from surfaces that may be damaged by

steam.

2. Fully unwind the cable and plug in. For safety do not allow

the cable to dangle over the edge of units.

3. Take up the kettle from the base; open the lid and fill to the

required level using the graduated markings on the clear

panel as a guide. Do not fill past the maximum (1.7 litre) or

below the minimum (0.75 litre) level.

4. Close the lid fully until it clips into place and ensure that the

switch is in the off position (lift switch up) before replacing

on the base.

5. Turn the kettle so that the spout faces away from you and

switch the kettle on by pressing the switch downwards. The

kettle will start to operate and the blue power indicator lamp

in the switch will illuminate.

6. When the water boils, the kettle will switch off automatically

and the lights will go off.

7. To stop or interrupt the boiling process, switch the appliance

off by lifting the switch up before removing the kettle from

the base.

Notes :

•

Before using for the first time, fill the kettle to the maximum

level, bring to the boil and then discard water. Repeat this

step one further time.

•

This kettle is fitted with a safety device that automatically

switches off the heater element if the appliance is

inadvertently switched on when empty or if it boils dry. In

this case allow the kettle to cool completely (minimum 15

minutes) before refilling with cold water. The kettle will

resume operation after refilling.

Issue 1 20/07/2023