- ページ 2

テント Active Grow WaldenのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Active Grow Walden 2 ページ。 Grow tent
Active Grow Walden にも：インストレーション・マニュアル (2 ページ), インストレーション・マニュアル (3 ページ)

Tent Assembly Instructions (continued)

Ax1

7. Create the Medial Roof Support by sliding the Medial Roof

Support Clamps x2 onto the ends of A Pole x1. Attach it to the top

of the tent frame in the center. Make sure the open part of the

clamps face the ﬂoor when attaching the support.

9. Unzip all zippers before covering the framing with the tent.

Spread the tent on the ground and put the tent frame into the

bottom of the tent covering.

11. Zip all tent seams together and insert the spill tray into the

bottom of the tent. Use the velcro straps on each corner of the spill

tray to attach it to the tent's corner poles.

Walden Tent Installation Guide

Medial Roof Support x1

Active Grow LLC, (206) 792-9799, 12345 Lake City NE #2137, Seattle, WA 98125

www.activegrowled.com

Ax2

8. Create the Lateral Roof Supports by sliding the Lateral Roof

Support Clamps x4 onto the ends of A Poles x2. Attach them to

the top of the tent frame below the Medial Roof Support. Make

sure the open part of the clamps face the ﬂoor when attaching

the supports.

10. Place the tent covering over the top of the tent frame and

continue to wrap the sides and front of the frame. Note do not use

excessive force when stretching the tent covering over the frame.

Lateral Roof Supports x2