- ページ 8

照明器具 dymax BlueWave MX-275のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。dymax BlueWave MX-275 20 ページ。 Emitter
dymax BlueWave MX-275 にも：ユーザーマニュアル (16 ページ)

BlueWave® MX-275 Emitter User Guide

Shield the Operator

UV-Blocking Eye Protection —

UV-blocking eye protection is recommended when

operating UV light-curing systems. Both clear and tinted UV-blocking eye protection is

available from Dymax.

UV-Blocking Skin Protection —

Opaque, UV-blocking clothing, gloves, and full-face

shields are recommended when skin may potentially be exposed to UV light.

Shield the Source of UV

Any substrate that blocks UV light can be used as a shield to protect workers. The

following materials can be used to create simple shielding structures:

Rigid Plastic Film —

Transparent or translucent/UV-blocking plastics (typically

polycarbonate or acrylic) are commonly used to create shielding where some level of

transparency is also desired.

Flexible Film —

Translucent UV-blocking, flexible urethane films can be used to

quickly create workstation shielding. This UV-blocking, flexible urethane film is available

from Dymax, call for assistance.

High-Temperature Surfaces

Surfaces exposed to high-intensity curing energy may rise in temperature. The intensity,

distance, exposure time, cooling fans, and composition of the surface can all affect the

rise in surface temperature. In some cases, exposed surfaces can reach temperatures

capable of producing a burn or causing damage to a substrate. In these cases, operators

should try to maintain a cooler surface temperature or they should have the appropriate

protection/training to avoid injury from the heat.

Bright Visible Light

The bright visible energy emitted by curing systems can cause eyestrain if proper eye

protection or shielding is not used. The use of tinted eye protection and/or opaque/

tinted shielding can be utilized to reduce eyestrain and address this concern.