dymax BlueWave MX-275 Podręcznik użytkownika - Strona 8
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Sprzęt oświetleniowy dymax BlueWave MX-275. dymax BlueWave MX-275 20 stron. Emitter
Również dla dymax BlueWave MX-275: Podręcznik użytkownika (16 strony)
Drukuj stronę
8
BlueWave® MX-275 Emitter User Guide
Shield the Operator
UV-Blocking Eye Protection —
UV-blocking eye protection is recommended when
operating UV light-curing systems. Both clear and tinted UV-blocking eye protection is
available from Dymax.
UV-Blocking Skin Protection —
Opaque, UV-blocking clothing, gloves, and full-face
shields are recommended when skin may potentially be exposed to UV light.
Shield the Source of UV
Any substrate that blocks UV light can be used as a shield to protect workers. The
following materials can be used to create simple shielding structures:
Rigid Plastic Film —
Transparent or translucent/UV-blocking plastics (typically
polycarbonate or acrylic) are commonly used to create shielding where some level of
transparency is also desired.
Flexible Film —
Translucent UV-blocking, flexible urethane films can be used to
quickly create workstation shielding. This UV-blocking, flexible urethane film is available
from Dymax, call for assistance.
High-Temperature Surfaces
Surfaces exposed to high-intensity curing energy may rise in temperature. The intensity,
distance, exposure time, cooling fans, and composition of the surface can all affect the
rise in surface temperature. In some cases, exposed surfaces can reach temperatures
capable of producing a burn or causing damage to a substrate. In these cases, operators
should try to maintain a cooler surface temperature or they should have the appropriate
protection/training to avoid injury from the heat.
Bright Visible Light
The bright visible energy emitted by curing systems can cause eyestrain if proper eye
protection or shielding is not used. The use of tinted eye protection and/or opaque/
tinted shielding can be utilized to reduce eyestrain and address this concern.