ページを印刷するDrywall and Concrete
Wall Installation
1. In the area where you
want to mount your
screen, use the leveler to
ensure the wall mount is
straight, and mark the
appropriate mount holes
with a pencil.
2. Use a
3/8 in. (10 mm)
drill holes
drill bit, and
approximately 2.4 in.
(60 mm) deep into the
wall, and insert the
anchors (J) into the holes.
10
Installation Instructions
3. Attach the wall mount to
the wall with screws (I)
and washers (K) until the
wall mount is held in place,
but do not completely
tighten the screws.
4. Check the horizontal
orientation by placing the
bubble level on the top
edge of the wall mount.
If the mount isn't perfectly
horizontal, gently tap
the side that needs
adjustment.
5. Once the wall mount
is straight, tighten the
screws until the mount
secure.