GABOR TM-3770 사용자 설명서 - 페이지 10

{카테고리_이름} GABOR TM-3770에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. GABOR TM-3770 16 페이지.

Drywall and Concrete

Wall Installation

1. In the area where you

want to mount your

screen, use the leveler to

ensure the wall mount is

straight, and mark the

appropriate mount holes

with a pencil.

2. Use a

3/8 in. (10 mm)

drill holes

drill bit, and

approximately 2.4 in.

(60 mm) deep into the

wall, and insert the

anchors (J) into the holes.

Installation Instructions

3. Attach the wall mount to

the wall with screws (I)

and washers (K) until the

wall mount is held in place,

but do not completely

tighten the screws.

4. Check the horizontal

orientation by placing the

bubble level on the top

edge of the wall mount.

If the mount isn't perfectly

horizontal, gently tap

the side that needs

adjustment.

5. Once the wall mount

is straight, tighten the

screws until the mount

secure.