- ページ 6

電源 Dymond Powerbase 500のPDF インストラクションをオンラインで閲覧またはダウンロードできます。Dymond Powerbase 500 13 ページ。

FEATURES

• Active PFC design: efficient electronic energy Utilization, the output voltage is not affected by input voltage

fluctuation

• Small size, high power density

• ON / OFF power switch

• Powerbase 500: Dual DC output, Can be charged at the same time two output terminals

• C 100-240V worldwide operation: no need any alternative switcher, worldwide safe operation

• Smart cooling fan turned on upon the temperature automatically with low-noise

• Short circuit, over current and over temperature protection, safer and more reliable

SAFETY NOTES

These warnings and safety notes are very important, when use the pow-

er supply need follow the instructions carefully. Incorrect operation could

result in the power supply or other equipments damage, even cause the

electric shock or fire.

• Do not use the power supply when it is unattended, if have any problems, please cut off the power and check it.

• Do not use the power supply near water(for example, a bathtub, washbowl, kitchen sink, laundry tub, wet base-

ment, or swimming pool).

• Do not place the power supply on an unstable cart, stand or table, if the power supply falls, it could.

• Do not overload power outlets or extension cords. An overload can result in fire or electric shock.

• Do not disassemble this unit, take it to a qualified service technician when service or repair is required, improper

reassembly may result in a risk of electric shock or fire.

• Do not use an attachment not recommended, this could result in a risk of fire, electric shock, or injury to persons.

• Never push any object into slot in the power supply, it could touch dangerous voltage points or short out parts

resulting in a fire or electrical shock.

• The power supply should be operated only from a standard AC outlet that provides 100-240V,50/60HZ,lf you

are not sure of the type of power supplied to your home, consult your local power company.

• To protect the power supply during a lightning storm or when it left unattended and unused for long periods of

time, unplug it from the AC outlet. This will prevent to the power supply from lightning and power surges.

• Unplug the power supply from the outlet before attempting any maintenance or cleaning. Do not use liquid or

aerosol cleaners. Use a damp cloth for cleaning and then wipe it dry immediately.

• If your power supply does not operate normally. in particular if any unusual or smells come from it, unplug it

immediately and contact a qualified service technician for repair.