- ページ 7

電源 Dymond Powerbase 500のPDF インストラクションをオンラインで閲覧またはダウンロードできます。Dymond Powerbase 500 13 ページ。

OPERATION INSTRUCTION

1.Before use the power supply, keep the switch "OFF"

2.Plug the AC power cord to the power supply and AC socket, then connect battery to the DC output port.

3. The positive (+) and negative (-) of the positive electrode (+) of the input terminal of the charger or other direct

current equipment is connected with the red (+) and black (-) connector of the power supply output.

4.1 Make sure all output connect are correct before turn on the power supply.

4.2 Make sure the power switch is off.

4.3 After using, turn off the power firstly, then disconnect the AC power supply, disconnect the power supply

device finally.

When overload mistakes happen, the power supply will automatically shut down, please re-

move the load, turn off the power switch, then turn on the power supply again, and reduce the

load for use.

AC Power input

Power Switch

Output 1

Output 2