ページを印刷するWhat you should receive with your CompuScope 1220
If you order an independent CompuScope 1220 card, you should receive the following articles:
•
CompuScope 1220 card. You should notice the configuration of the BNC connectors on the face plate
of your CompuScope 1220 card.
If you purchased a CompuScope 1220-4M or CompuScope 1220-8M card, you should see a piggyback
memory board attached to the back of the card, as shown below.
If you purchased a CompuScope 1220 card with 64M, 256M, 512M or 1G acquisition memory, you
should see a full-length piggyback memory board attached to the back of the card, as shown below.
You should also receive one Y-cable for powering the piggyback memory board (also known as Deep
Memory Board).
4
CompuScope 1220