ページを印刷する•
Standard items included with each independent CompuScope card
Hardware manual, including Driver Installation Guide
Gage Software Disk (with GageScope Software)
CompuScope Certificate of NIST Traceable Calibration
Warranty card
•
You may also receive a number of optional items, if purchased:
®
GageScope
software and
Standard or Professional edition
Software Key envelope
CompuScope 1220
Note that you will receive only one copy of the Hardware Manual per
order placed with Gage. Additional copies can be requested at order time.
The Hardware Manual is also available in PDF format on the Gage
Software Disk or you can download card-specific manuals from Gage's
Web site.
The Gage Software Disk, included at the back of the Hardware Manual
and Installation Guide, contains all of the software drivers you need to
operate your Gage hardware. The CD also contains all of the installers
for the application packages provided by Gage, including Lite, Standard
and Professional editions of GageScope.
Note that some packages will only be available if you have purchased the
software and have a key provided by Gage.
Each CompuScope card is shipped with a Certificate of NIST Traceable
Calibration. NIST is the National Institute to Standards and Technologies
- the US organization that is responsible for the definitions and
measurement of metrology standards.
Prior to shipment, Gage runs each CompuScope card through a battery of
over 1000 automated performance verification tests using a NIST
traceable calibration source. The tested CompuScope is then considered a
NIST traceable calibration instrument for a period of one year – the
calibration interval that is generally accepted by the Test and
Measurement industry.
Software Development Kits (SDKs)
& applicable manual(s)
5