- ページ 3

ツール Gage Bilt GB708LGPのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Gage Bilt GB708LGP 8 ページ。 Hydraulic tool

ページを印刷する

MUST BE UNDERSTOOD TO AVOID

SEVERE PERSONAL INJURY

WARNING

Do not pull fastener unless it is placed in an

assembly, pin will eject forcibly when pintail breaks

off. Severe personal injury may result.

WARNING

When operating, repairing or overhauling tool, wear

approved eye protection. Do not look in front of tool

or rear of tool when installing fastener.

WARNING

Do not operate if deflector, bottle, catcher bag or

vacuum tube is removed or damaged, broken

pintails may eject forcibly from rear of tool. Severe

personal injury may result.

Keep tool clean and free of chips and debris.

Do not use beyond the design intent.

WARNING

Tool must be maintained in a safe working

condition at all times and examined on a regular

daily basis for damage or wear. Any repair should

be done by qualified personnel trained on Gage Bilt

procedures.

WARNING

Where prolonged use is foreseen, it is

recommended a tool balancer be used. Check

suspension device to ensure that it is secure.

Do no use tool in explosive atmosphere.

S/N: 1107 AND ABOVE

PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

SAFETY WARNINGS

PLEASE READ THIS MANUAL BEFORE

SERVICING OR USING THIS TOOL.

WARNINGS:

CAUTION

WARNING

CAUTIONS:

SHOW CONDITIONS THAT WILL

DAMAGE EQUIPMENT OR STRUCTURE

It is recommended operator wear a suitable glove

during operation where prolonged use is expected.

Always disconnect tool from power before

performing any maintenance to any tool. Ensure

that all connections are proper and there are no

visible leaks from tool or hoses before connecting

Risk of crushing exists. Be sure there is adequate

clearance for tool and operator's hands before

proceeding. Keep fingers clear of any moving

parts. Keep fingers clear from fasteners and

installed materials. Severe personal injury may

It is required to use hearing protection. A test was

carried out in a simulated work environment where

the background level was 73.2 dB (A). In this

condition the max level was 81.5 dB (A). Therefore,

it is required where prolonged use, hearing

protection be used.

It is recommended tool be operated 50 out of every

60 minutes, where prolonged use is expected.

Tool is not to be used as a hammer.

Hydraulic pressure not to exceed 5,600 PSI (386.1

bar) pull 2,400 (165.5 bar) reload

WARNING

Shock:

WARNING

to power.

WARNING

result.

WARNING

CAUTION

REV. 7/14