- ページ 4

電動工具 Gage Bilt GB703SR8VTのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Gage Bilt GB703SR8VT 15 ページ。 Installation tool

PRINCIPLE OF OPERATION

When the lever assy is depressed, the pressurized air inside of the tool is released allowing spring pressure to move the valve

spool assy causing the air to be redirected. The air is directed to the top of the air piston assy, moving it in a downward direction.

The air below the air piston assy is then directed through the valve sleeve and exhausted out of the bottom of the tool.

Simultaneously, the piston rod assy connected to the air piston assy is also moving down, forcing hydraulic oil up and into the

front side of the head cylinder assy, causing the piston to move to the rear of the head cylinder assy. The internal components of

the attached nose assembly are also moving with the piston to start the fastener installation. When the fastener installation is

completed, the lever assy is released. Air pressure is then built up inside of the handle assy causing the valve spool assy to return

to its original position and reversing the sequence directing air pressure to the rear of the head cylinder assy, causing the piston

to move to the forward position, simultaneously releasing the spent pintail from the nose assembly, allowing it to be vacuumed

into the tube.

Image may not reflect actual tool

REV. 10/14