- ページ 10

リベット工具 Gage Bilt GB704のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Gage Bilt GB704 14 ページ。 Installation tool
Gage Bilt GB704 にも： インストレーション・マニュアル (13 ページ), オリジナル取扱説明書 (20 ページ)

ページを印刷する
Gage Bilt GB704 マニュアル
HEAD
WARNING:
Dispose of hydraulic oil in accordance with applicable regulations.
Remove nose assembly from tool before attempting disassembly of head assy.
Remove end cap (704112). Push against threaded end of piston (704507) to slide it out of head cylinder assy (704183). Be careful not
to damage threads or cause burrs on polished piston (704507) surface.
The re-assembly sequence is the opposite of disassembly. (See Filling and Bleeding instructions.) Apply Loctite #242 and torque the
socket head cap screws (400061 and 400066) uniformly to 40 inch lbs. to prevent leakage around the gasket (704129).
S/N: 1090 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
401080 - BACK-UP RING
10
204304 - SWIVEL ASSEMBLY
403764 - O'RING
Rev. 11/14