Gage Bilt GB704 매뉴얼 - 페이지 10

{카테고리_이름} Gage Bilt GB704에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gage Bilt GB704 14 페이지. Installation tool
Gage Bilt GB704에 대해서도 마찬가지입니다: 설치 매뉴얼 (13 페이지), 원본 사용 설명서 (20 페이지)

페이지 인쇄

HEAD

WARNING:

Dispose of hydraulic oil in accordance with applicable regulations.

Remove nose assembly from tool before attempting disassembly of head assy.

Remove end cap (704112). Push against threaded end of piston (704507) to slide it out of head cylinder assy (704183). Be careful not

to damage threads or cause burrs on polished piston (704507) surface.

The re-assembly sequence is the opposite of disassembly. (See Filling and Bleeding instructions.) Apply Loctite #242 and torque the

socket head cap screws (400061 and 400066) uniformly to 40 inch lbs. to prevent leakage around the gasket (704129).

S/N: 1090 AND ABOVE

PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

401080 - BACK-UP RING

204304 - SWIVEL ASSEMBLY

403764 - O'RING

Rev. 11/14