- ページ 4

室内装飾品 AirComfort DREAM EASY 6201TRBのPDF 製品マニュアルをオンラインで閲覧またはダウンロードできます。AirComfort DREAM EASY 6201TRB 5 ページ。 Twin raised air mattress

ASSEMBLY INSTRUCTIONS

SETTING UP / STORING AWAY

INFLATING:

1. Check your surroundings for any sharp objects on the

ground/floor that may cause damage to the bed (nails,

screws, sharp rocks, etc.)

2. Remove the air mattress from its packaging, Unfold

and lay it flat on the floor.

3. Ensure the pump is in the "OFF" position.

4. Open the power cord compartment and connect the

pump cord to an electrical outlet.

5. Make sure the air inlet vents are clear of any

obstructions.

6. Turn the control dial clockwise to the "INFLATE"

position as shown.

7. When the air mattress reaches the desired firmness

rotate the control dial back to the "OFF" position as

shown.

8. Adjust the firmness by either continuing to inflate the

air mattress or turn the control dial to "Deflate" to let

some air out.

9. Unplug the power cord and store it in the power cord

compartment.

DO NOT OVERINFLATE. INFLATE UNTIL THE

WRINKLES ARE ALMOST GONE, AND THE

MATTRESS IS FIRM.

DEFLATING/STORAGE:

1. Plug in the power cord and turn the control dial

counterclockwise to "Deflate" the air mattress

2. Allow the air mattress to completely deflate.

3. Unplug the power cord and place it back into the

storage compartment.

4. Make sure the mattress is clean and dry.

5. Lay mattress felt-side up and fold the mattress into

thirds, then roll up the mattress to release any

remaining air.

6. Store the mattress in a cool, dry place

MODEL# 6201TRB

Youtube Assembly Instructions Video:

https://www.youtube.com/watch?v=0vlyDN015l4

OPEN

SWITCH