AirComfort DREAM EASY 6201TRB Посібник з експлуатації - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Внутрішнє оздоблення приміщень AirComfort DREAM EASY 6201TRB. AirComfort DREAM EASY 6201TRB 5 сторінок. Twin raised air mattress
Друкувати сторінку
ASSEMBLY INSTRUCTIONS
SETTING UP / STORING AWAY
INFLATING:
1. Check your surroundings for any sharp objects on the
ground/floor that may cause damage to the bed (nails,
screws, sharp rocks, etc.)
2. Remove the air mattress from its packaging, Unfold
and lay it flat on the floor.
3. Ensure the pump is in the "OFF" position.
4. Open the power cord compartment and connect the
pump cord to an electrical outlet.
5. Make sure the air inlet vents are clear of any
obstructions.
6. Turn the control dial clockwise to the "INFLATE"
position as shown.
7. When the air mattress reaches the desired firmness
rotate the control dial back to the "OFF" position as
shown.
8. Adjust the firmness by either continuing to inflate the
air mattress or turn the control dial to "Deflate" to let
some air out.
9. Unplug the power cord and store it in the power cord
compartment.
DO NOT OVERINFLATE. INFLATE UNTIL THE
WRINKLES ARE ALMOST GONE, AND THE
MATTRESS IS FIRM.
DEFLATING/STORAGE:
1. Plug in the power cord and turn the control dial
counterclockwise to "Deflate" the air mattress
2. Allow the air mattress to completely deflate.
3. Unplug the power cord and place it back into the
storage compartment.
4. Make sure the mattress is clean and dry.
5. Lay mattress felt-side up and fold the mattress into
thirds, then roll up the mattress to release any
remaining air.
6. Store the mattress in a cool, dry place
MODEL# 6201TRB
Youtube Assembly Instructions Video:
https://www.youtube.com/watch?v=0vlyDN015l4
OPEN
SWITCH
4